Installation Instructions - CASO DESIGN SteamMaster E 56 Manual De Instrucciones

11.10 Installation instructions

The device can be installed in a 600 mm wide built-in wall cabinet.
A space of 50 mm must be left behind the cabinet.
A 250 cm² ventilation shaft is required so that sufficient fresh air can be supplied and the
warm exhaust air can be discharged.
1. Slowly push the device into
the center of the corpus of the kitchen
cabinet.
2. Do not pinch or kink the power
cord.
3. Check the distance between
the device at the top and bottom of
the corpus of the cabinet, where the
holes for the screws are.
4. Open the door of the device.
5. If necessary, adjust the
distance between the device and the
corpus.
51