Individual Setting / Quick Start; Temperature Setting; Timer Setting - CASO DESIGN SteamMaster E 56 Manual De Instrucciones

fermentieren (for yeast
dough fermentation /
yoghurt production)
descaling / cleaning
* Steam assistant can be used
*** Temperature setting in 1 ° C steps
Please note
► The device preheats with the convection function. Once the desired temperature has
been reached, the convection function switches off again.
► Attention: If you stop functions with steam cooking or the steam assistant prematurely,
water will still run into the supply lines. When you use the device again, this water
flows into the cooking chamber.

13.5 Individual setting / quick start

Press and hold
the desired function, the corresponding standard temperature is displayed.
13.5.1

Temperature setting

Press once so that the temperature display flashes. Then adjust the desired
temperature with
Then, for a quick start without setting the time, start with
► The temperature can be adjusted at any time during the cooking process.
To cook with an individual time setting, proceed as follows:
13.5.2

Timer setting

Press again,
desired temperature with
Please note
► As soon as you start the function, the timer countdown starts.
► The countdown can be adjusted at any time during the cooking process.
► When the cooking time has ended, "END" is displayed.
30
-
to activate the device. Press
and .
lights up and the time in the display flashes. Then adjust the
and and start with
20
***
30-80
-
** Temperature setting in 5 ° C steps
function button and the select
.
.
59