Spool Pins; Presser Foot Lifter, Darning Plate; Converting To Free-Arm Sewing - Singer Curvy 8763 Manual De Instrucciones

SPOOL PINS

HORIZONTAL SPOOL PIN for normal
thread spool
Place thread spool on the pin and secure with a spool cap to
retaining slit, it should be placed to the right.
Select the correct spool pin cap according to the type and
diameter of spool being used. The diameter of the spool pin
cap should always be larger than that of the spool itself.
VERTICAL SPOOL PIN for large thread
spool
Attach the spool pin. Place the large spool pin cap and felt
disc over it. Place a thread spool on the spool pin.
PRESSER FOOT LIFTER
There are three positions for your presser foot.
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove
fabric.
3. Lift it to its highest position to change the presser foot or to
remove thick fabric.
DARNING PLATE
Use the darning plate when you need to control fabric feeding
for button sewing, free motion work and free motion darning.
Raise needle and presser foot, and position darning plate onto
the needle plate with the two pins on the back inserted to the
holes of needle plate.

CONVERTING TO FREE-ARM SEWING

arm model.
With the extension table in position, it provides a large working
and pull it off to the left as shown. To replace, slide the
extension table back into place until it clicks.
With the extension table removed the machine converts into
a slim free-arm model for sewing children's clothes, cuffs,
trouser legs, and other awkward places.
12
Spool
Bobine
Carrete
Felt disc
Rondelle feutre
Disco del pasador carrete
Large spool pin cap
Chapeau pour grande bobine
Tapa del pasador carrete (grande)
Vertical spool pin
Porte-bobine vertical
Pasador de carrete vertical
Thread retaining slit
Ranura de retención de hilo
Spool pin cap
Tapa del pasador carrete
Spool pin
Spool
Porte-bobine
Bobine
Pasador carrete
Carrete