Maintenance And Repair - Faema E91 Diplomat Manual

English
10. Cautions
Danger of burns
!
The areas marked with this sign become hot.
Great care should be taken when in the
vicinity of these areas.
GENERAL
Use of gas operated appliances in premises smaller than 12
m is not permitted.
2
If a gas heated installation is used, change the flexible tube
at the due expiry date.
The manufacturer disclaims all liability for damages to items
or persons due to improper use or due to the coffee machine
being used for reasons other than its intended use.
Never work the coffee machine with wet hands or naked feet.
Cup-warming plate
Place only coffee cups, cups and glasses to be used in conjunction
with the coffee machine on the cup-warming plate.
Ensure that the coffee cups are completely drained before placing
them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate.
MACHINE CLOSE-DOWN
When the machine remains unattended for
a long period of time (at night, during the
weekly closing day or during holidays) the
following operations shall be performed:
!
- Remove the plug or switch off the main
switch.
- Close the water tap.
- Close the gas tap.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions or damage to persons or
items.
Danger of Burns
Do not place the hands or other parts of the body close to the coffee
distribution points, or near to the steam and hot water nozzles.
WARNING: Hot surface
ACHTUNG: Heisse Oberfläche
ATTENTION: Surface chaude
ATTENZIONE: Superficie calda

MAINTENANCE AND REPAIR

If the machine does not function correctly, switch it off, turn off the
main switch and call the service agent.
Only qualified and authorised servicing personnel should
be called.
Use only original spare parts.
Maintenance activities performed by unqualified personnel
may jeopardise the safety of the machine.
If the electric cable is damaged, switch off the machine and apply to
the servicing department for a replacement.
The following measures are indispensable for
ensuring operational and functional safety:
!
- Comply with all the manufacturer’s instructions.
- Ensure that specialized technicians periodically
verify that the protection devices are intact and that
all the safety devices function correctly (the first
inspection should be made within 3 years and
subsequently once yearly).
Regeneration of the Water Softener
The machine must be installed with an ionic resin water softener.
The water softener may be of different types, with different resin
capacities and different periods of validity.
The resins are regenerated by adding coarse kitchen salt or salt
pastilles to the water softener.
If the regeneration of the resins is not made at the due dates,
calcareous deposits will form which progressively decrease the
machine’s efficiency until its functions are completely blocked.
The regeneration due dates and method thereof may be found in the
instructions provided with the equipment.
If regeneration is performed at the due dates, the machine is maintained
in ideal working conditions.
English