Symbol Explanation; General Information; Correct Use; Safety Notes - oventrop Regumat 220 Manual De Instrucciones

EN
Read installation and operating instructions
carefully before installing the boiler connection
system
The installation and operating instructions as
well as all other valid documents have to re-
main with the user of the system
Content:
1 General information . . . . . . . . . . . . . . . . . . 7
2 Safety notes . . . . . . . . . . . . . . . . . . . . . . . 7
3 Transport and packaging . . . . . . . . . . . . . 8
4 Installation and assembly . . . . . . . . . . . . . 8
5 Technical data . . . . . . . . . . . . . . . . . . . . . . 11
1

General information

1.1 Information regarding installation and
operating instructions
These installation and operating instructions serve
the installer to install the boiler connection system
professionally and to set it into operation.
Other valid documents: Manuals of all system
components.
1.2 Keeping of documents
The installation and operating instructions should
be kept by the user of the system.
Valves, controls + systems
Boiler connection system
"Regumat 220/280" DN40/50
Installation and operating instructions

1.3 Symbol explanation

Safety guidelines are displayed by symbols. These
guidelines are to be observed to prevent acci-
dents, damage to property and malfunctions.
DANGER
Imminent danger to life and limb
ATTENTION
Potential dangerous situation for product,
system and environment
1.4 Copyright
The installation and operating instructions are
copyrighted.
2

Safety notes

2.1 Correct use

Operating safety is only guaranteed if the boiler
connection system is used correctly.
Any use of the product outside its intended design
will be considered as non compliant and misuse.
The boiler connection system "Regumat" allows a
time- and space-saving connection of the boiler
to the pipework.
Claims of any kind against the manufacturer
and/or its authorised representatives due to da-
mages caused by incorrect use cannot be accep-
ted.
The observance of the installation and operating
instructions is part of the compliance terms.
7