I.operating And Maintenance Instructions - Gastrodomus RANGE1 Manual Del Usuario

I.Operating and maintenance instructions

Operating and Maintenance Instructions PD-1PT
1.The internal lighting of the oven is controlled by the " Lighting" switch.
2.The temperature is controlled by the power switch. When the oven turns on, (the timer cannot be
programmed), the "Primer" and "Surface" thermostats will start to work, meanwhile the temperature will
start to rise (when it reaches the set temperature, the "Surface Indicator" light will turn off).
3.The "Timer" switch doesn't only define time but it is also used as a power switch.
4.The primary heating and its indicator light (Primer Indicator) are controlled by "Primer Thermostat", while
the surface heating and its indicator light (Surface Indicator) are controlled by "Surface Thermostat".
Operating and Maintenance Instructions PD-2PT
1. The internal lighting of the oven is controlled by the " Lighting" switch.
2. The temperature is controlled by the power switch. When the oven turns on, (the timer
cannot be programmed), the "Primer" and "Surface" thermostats will start to work,
meanwhile the temperature will start to rise (when it reaches the set temperature, the
"Surface Indicator" light will turn off).
3. The "Timer" switch doesn't only define time but it is also used as a power switch.
4. The primary heating and its indicator light (Primer Indicator) are controlled by "Primer
Thermostat", "middle heating" and its indicator light are controlled by "Middle Thermostat",
while surface heating and its indicator light (Surface Indicator) are controlled by "Surface
Thermostat".
14