Intended Use; Technical Specification; Safety, Maintenance, Guarantee; Assembly - Etac MOLIFT Manual

Etac Raiser / www.etac.com
Gebruik de veiligheidsbanden met de schuifvoorziening, veilig­
heidsbanden en hefgreep.
C1. Veiligheidsband met schuifvoorziening. Een verzorger kan een
gebruiker waar nodig bij het opstaan helpen. De veiligheids-
band wordt aan de bevestiging bevestigd en de antislipkant
van de schuifvoorziening wordt onder het achterste van de
gebruiker geplaatst. De verzorger kan de gebruiker stimuleren/
helpen om zelf omhoog te komen door aan de andere kant
aan de veiligheidsband te trekken. Als de gebruiker rechtstaat,
wordt de veiligheidsband ook aan de andere kant bevestigd.
C2. Twee verzorgers kunnen de gebruiker helpen als hij of zij meer
hulp nodig heeft bij het opstaan. OPMERKING: Gebruik de
BEVESTIGDE grepen op de schuifvoorziening als u tilsessies
uitvoert. Bevestig de veiligheidsband aan beide kanten.
EN

Intended use

The Etac Raiser is a lifting and transfer aid that simplifies lifting and
transfer for both users and carers from sitting to another position.
Used by users who can understand the instructions, who can grip
and can lift their own weight, but need support or assistance when
lifting themselves up to a standing position and during transfer.
The Etac Raiser is designed to be operated on a flat surface and
for short transfers, such as between a wheelchair and a toilet. It is
designed so that it is easy to manoeuvre and use even in confined
spaces.
The Etac Raiser is intended for indoor use and must not
be stored outdoors.
This symbol appears in the manual together with text. It
highlights actions where user or carer safety can be put
at risk if the manual is not foll owed.
Lifts and transfers using the Etac Raiser must always be
carried out by carers.
Max 8 mm threshold.
In this manual the user is the person receiving transfer assistance.
The carer is the person manoeuvring the transfer platform.
Visit www.etac.com for more information, advice and
documentation. Check that you have the latest version of
the manual.

Technical specification

Max. user weight SWL: 150 kg
Tests: Tested and approved according to EN 12182 and appropri-
ate sections of EN 10535
Weight:
Total weight: 14.2 kg
Frame: 8.6 kg
Handle frame with lower leg support: 5.6 kg
Material: Steel, Plastic, Aluminium, TPR. Corrosion sensitive parts
are ED or powder coated
Dimensions: See page 19
Entrance height: 47 mm
Height lower leg support from footplate, min-max: 145-510 mm
Has a turn diameter of 72 cm
Options: Colour, Red or gray
D1. Veiligheidsband . Schuif de band om de rug van de gebruiker
D2. Maak de veiligheidsband vast aan de bevestigingspunten op
de framehandgreep.
E1. Hefgreep. Zet de hefgreep op de juiste hoogte op het hand-
greepframe door de band door zichzelf terug te voeren.
E2. De hefgreep helpt gebruikers die moeite hebben om bij de
handgreep te komen, bijvoorbeeld door verminderde mobiliteit
in de schouders.

Safety, maintenance, guarantee

Product transport
Transport can be simplified if the Etac Raiser is dismantled into
two sections. The frame and the handle frame can be carried
separately.
Maintenance
We recommend regular cleaning of the Etac Raiser
to increase its service life. Wipe it with a soft cloth
max
and standard solvent-free cleaning agent. Use
150 kg
70% alcohol if there is a need for disinfection.
Remove any hair or fluff when required from the wheels and make
sure the wheels rotate freely.
Do not allow the product to remain unused when the
brakes are applied.
When the Etac Raiser is to be reused by a new user, make sure that
all necessary technical documentation is supplied with the product.
The Etac Raiser must be inspected, cleaned and restored to its
original state by authorised staff before being used again.
See the separate instructions on reconditioning. Visit www.etac.
com.
When reconditioning or replacing parts, use only original parts
from Etac. Etac will not be held responsible for damage or injury
caused by use of non-original parts.
Guarantee/Service life
5 year guarantee against material and manufacturing defects.
Expected service life on normal use and performed maintenance
is approx. 10 years.

Assembly

See the instruction diagram on page 4.
The Etac Raiser is supplied unassembled in the box.
An Allen key for assembly is included. It is recommended that
assembly be carried out by a professional technician.
A1. Slide the accompanying nut retainer onto the handle frame.
A2. Place the handle frame with the lower leg support in the
attachment in the chassis.
A3. Make sure that the nut retainer aligns up with the hole on the
handle frame. Fit the bolts using the accompanying Allen key.
A4. Check that the bolts are fully tightened before using the prod-
uct.
16