Intended Use; Technical Specification; Safety, Maintenance, Guarantee; Assembly - Etac Molift Raiser Manual De Instrucciones

Molift Raiser / www.etac.com
heidsbanden en hefgreep.
C1. Veiligheidsband met schuifvoorziening. Een verzorger kan een
gebruiker waar nodig bij het opstaan helpen. De veiligheids-
band wordt aan de bevestiging bevestigd en de antislipkant
van de schuifvoorziening wordt onder het achterste van de
gebruiker geplaatst. De verzorger kan de gebruiker stimuleren/
helpen om zelf omhoog te komen door aan de andere kant
aan de veiligheidsband te trekken. Als de gebruiker rechtstaat,
wordt de veiligheidsband ook aan de andere kant bevestigd.
C2. Twee verzorgers kunnen de gebruiker helpen als hij of zij meer
hulp nodig heeft bij het opstaan. OPMERKING: Gebruik de
BEVESTIGDE grepen op de schuifvoorziening als u tilsessies
uitvoert. Bevestig de veiligheidsband aan beide kanten.
D1. Veiligheidsband . Schuif de band om de rug van de gebruiker
EN

Intended use

The Molift Raiser is a lifting and transfer aid that simplifies lift-
ing and transfer for both users and carers from sitting to another
position. Used by users who can understand the instructions,
who can grip and can lift their own weight, but need support or
assistance when lifting themselves up to a standing position and
during transfer. The Molift Raiser is designed to be operated on a
flat surface and for short transfers, such as between a wheelchair
and a toilet. It is designed so that it is easy to manoeuvre and use
even in confined spaces.
The Molift Raiser is intended for indoor use and must not
be stored outdoors.
This symbol appears in the manual together with text. It
highlights actions where user or carer safety can be put
at risk if the manual is not foll owed.
Lifts and transfers using the Molift Raiser must always
be carried out by carers.
Max 8 mm threshold.
In this manual the user is the person receiving transfer assistance.
The carer is the person manoeuvring the transfer platform.
Visit www.etac.com for more information, advice and
documentation. Check that you have the latest version of
the manual.

Technical specification

Max. user weight SWL: 150 kg
Tests: Tested and approved according to EN 12182 and appropri-
ate sections of EN 10535
Weight:
Total weight: 14.2 kg
Frame: 8.6 kg
Handle frame with lower leg support: 5.6 kg
Material: Steel, Plastic, Aluminium, TPR. Corrosion sensitive parts
are ED or powder coated
Dimensions: See page 19
Entrance height: 47 mm
Height lower leg support from footplate, min-max: 145-510 mm
Has a turn diameter of 72 cm
Options: Colour, red
All manuals and user guides at all-guides.com
D2. Maak de veiligheidsband vast aan de bevestigingspunten op
E1. Hefgreep. Zet de hefgreep op de juiste hoogte op het hand-
E2. De hefgreep helpt gebruikers die moeite hebben om bij de

Safety, maintenance, guarantee

Product transport
Transport can be simplified if the Molift Raiser is dismantled into
two sections. The frame and the handle frame can be carried
separately.
Maintenance
Remove any hair or fluff when required from the wheels and make
sure the wheels rotate freely.
When the Molift Raiser is to be reused by a new user, make sure
that all necessary technical documentation is supplied with the
product.
The Molift Raiser must be inspected, cleaned and restored to its
original state by authorised staff before being used again.
See the separate instructions on reconditioning. Visit www.etac.
com.
When reconditioning or replacing parts, use only original parts
from Etac. Etac will not be held responsible for damage or injury
caused by use of non-original parts.
Guarantee/Service life
5 year guarantee against material and manufacturing defects.
Expected service life on normal use and performed maintenance
is approx. 10 years.

Assembly

See the instruction diagram on page 4.
The Molift Raiser is supplied unassembled in the box. It is recom-
mended that assembly be carried out by a professional technician.
A1. Slide the accompanying nut retainer onto the handle frame.
A2. Place the handle frame with the lower leg support in the
A3. Make sure that the nut retainer aligns up with the hole on the
A4. Check that the handles are fully tightened before using the
16
de framehandgreep.
greepframe door de band door zichzelf terug te voeren.
handgreep te komen, bijvoorbeeld door verminderde mobiliteit
in de schouders.
We recommend regular cleaning of the Molift
Raiser to increase its service life. Wipe it with a soft
max
cloth and standard solvent-free cleaning agent.
150 kg
Use 70% alcohol if there is a need for disinfection.
Do not allow the product to remain unused when the
brakes are applied.
attachment in the chassis.
handle frame. Fit the handles and tighten
product