Hach NA5600 sc Na+ Manual De Instrucciones página 6

Figure 3 Measurement screen—top
1 Sodium concentration
2
2 Channel name
3 Analyzer name
4 Home (measurement screen)
5 Channel being measured
Figure 4 Measurement screen—bottom
1 PROGNOSYS measurement quality indicator
(refer to PROGNOSYS indicator bars
on page 7)
2 Calibration information
3 PROGNOSYS service indicator (refer to
PROGNOSYS indicator bars
4 Calibration standard level
2
For example, "1-SAMPLE1" is "Channel 1-SAMPLE1". SAMPLE1 is the default name for
Channel 1. Channels that contain the symbol "~" are not measured (e.g., 4-~SAMPLE4).
3
Shows when the analyzer has the auto calibration option.
6 English
on page 7)
3
6 Activity (shown during a measurement or
calibration process)
7 Reminder (maintenance is due)
8 SD card (shown when a SD card is inserted)
9 Relays (active relays are white squares)
10 Parameter measured (Na
5 Reactivation solution level
6 Conditioning solution level
7 KCl electrolyte level
+
= sodium)