Adjusting The Equalizer Curves (Equaliz E R) - Pioneer MEH-P9100R Manual De Operación

Audio Adjustment
2. Select the desired Equalizer curve. (e.g. Press button 1.)
Note:
• When you have performed Auto-equalizing (refer to page 56), you can turn AUTO EQ ON and
OFF by pressing the button for the equalizer curve that was called.
7 Sequential Recall
1. Press the AUDIO button and select the Graphic Equalizer mode (Equaliz
in the Audio Menu 1.
2. Select the desired Equalizer curve in the following order:
Super Bass + = Powerful + = Natural + = Vocal + = Custom + = Flat
Adjusting the Equalizer Curves (Equaliz
All curves but Flat can be adjusted (fine adjustment).
Adjustment can be made by either using Graphic Equalizer or 13-Band Graphic Equalizer
Adjustment.
7 Graphic Equalizer
The factory curves can be adjusted at fine levels (nuance control).
1. Press the AUDIO button and select the Graphic Equalizer mode (Equaliz
in the Audio Menu 1.
2. Recall the Equalizer curve you want to adjust. (Refer to previous section.)
3. Adjust the Equalizer curve.
Display shows "+6" – "–6".
Note:
• Adjustment range is subject to the curve.
• You can store the equalizer curve in CUSTOM by pressing button 5 for 2 seconds.
47
All manuals and user guides at all-guides.com
r)
E
r)
E
r)
E