Entering The Audio Menu 2; Audio Menu 2 Functions; Subwoofer Output (Sub W-1) - Pioneer MEH-P9100R Manual De Operación

Reproductor de md de alta potencia dsp con control de miltiplles cd/md/dab con sintonizador rds
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Audio Adjustment

Entering the Audio Menu 2

In the Audio Menu 2, you can operate convenient, complex functions for each source.
Note:
• After entering the Audio Menu 2, if you do not perform an operation within about 30 seconds, the
Audio Menu 2 is automatically canceled.
• Audio Menu 2 functions change depending on the Rear Speaker Output and Subwoofer Controller
setting in the Initial Setting Menu. (Refer to "Switching the Rear Speaker Output" and "Setting the
Subwoofer Control" on page 66.)
1. Enter the Audio Menu 2.
Hold for 2 seconds
2. Select the desired mode.
Each press changes the Mode ...
3. Operate a mode.
4. Cancel the Audio Menu 2.

Audio Menu 2 Functions

The Audio Menu 2 features the following functions.

Subwoofer Output (Sub W-1)

When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ ("Phase:NOR"), and
reverse, or 180˚("Phase:REV"). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is "Sub woofer control External", you cannot switch the
Subwoofer ON/OFF mode. In this case, this setting is not necessary. (Refer to page 66.)
• Select the OFF setting when you do not want the Subwoofer to operate.
51
All manuals and user guides at all-guides.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido