Subwoofer Setting Adjustment (Sub W-2) - Pioneer MEH-P9100R Manual De Operación

1. Select the Subwoofer ON/OFF mode (Sub W-1) in the Audio Menu 2.
(Refer to previous section.)
2. Switch the Subwoofer output
ON/OFF with the 5/∞ buttons.
3. Change the phase of Subwoofer
output with the 2/3 buttons.

Subwoofer Setting Adjustment (Sub W-2)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.
1. Select the Subwoofer setting mode (Sub W-2) in the Audio Menu 2.
(Refer to page 51.)
2. Select the frequency to 50 Hz,
80 Hz or 125 Hz with the 2/3
buttons.
3. Increase or decrease the output
level with the 5/∞ buttons.
The display shows "+6" – "–6".
Note:
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
All manuals and user guides at all-guides.com
52