High Pass Filter (High Pass); Loudness Adjustment (Loudn E Ss) - Pioneer MEH-P9100R Manual De Operación

High Pass Filter (High Pass)

When you do not want sound in the Subwoofer output frequency range output from the
front or rear speakers, switch the High Pass Filter ON. Only higher frequencies than those
in the selected range are output from the front and rear speakers.
1. Select the High Pass Filter mode (High Pass) in the Audio Menu 2. (Refer to
page 51.)
2. Switch the High Pass Filter
function ON/OFF with the 5/∞
buttons.
3. Select the desired frequency
with the 2/3 buttons.
50 + = 80 + = 125 (Hz)
Loudness Adjustment (Loudn
The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Select the Loudness mode (Loudn
page 51.)
2. Switch the Loudness function
ON/OFF with the 5/∞ but-
tons.
3. Select the desired level with the
2/3 buttons.
Low + = Mid + = High
All manuals and user guides at all-guides.com
ss)
E
ss) in the Audio Menu 2. (Refer to
E
54