Built-In Md Player's Error Message - Pioneer MEH-P9100R Manual De Operación

MD Player and Care

Built-in MD Player's Error Message

When problems occur with MD playback, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the
error persists, contact your dealer or your nearest PIONEER Service Center.
Message
Blank Disc
HEAT
ERROR- 11, 12, 17, 30
ERROR- 11, 12, 17, 30
ERROR- 01, 11, 12,
17, 30, A0
ERROR- 20, 21
ERROR- 20, 21, 24
ERROR- 23
ERROR- A1
ERROR-
79
All manuals and user guides at all-guides.com
Possible cause
Blank disc is inserted.
MD player overheating.
Dirty disc.
Scratched disc.
Electrical or mechanical
problem.
Track information cannot be
read.
There is something wrong with
the MD.
The MD contains recorded
information other than music.
Electrical or mechanical
problem.
MD play not possible.
Recommended action
Replace the disc.
Discontinue play until the machine
temperature drops.
Clean the disc.
Replace the disc.
Turn the ignition ON and OFF, or
switch to a different source, then back
to the MD player.
Reload the MD.
Replace the disc.
Replace the disc.
Press the Reset button.
Replace the MD with another disc,
or press the Reset button.