Setting The Dimmer (Dimmer); Selecting The Illumination Color; Selecting The Digital Attenuator - Pioneer MEH-P9100R Manual De Operación

Initial Setting

Setting the Dimmer (Dimmer)

To enable this product's display from being too bright at night, when the vehicle's head
lights are turned ON the display is dimmed.
You can switch this function ON/OFF.
1. Press the FUNCTION button and select the Dimmer mode (Dimmer) in the
Initial Setting Menu.
2. Switch the Dimmer ON/OFF
with the 5/∞ buttons.
Selecting the Illumination Color (Illumination Color)
This product is equipped with two illumination colors, green and red.
You can select the desired illumination color.
1. Press the FUNCTION button and select the Illumination Color mode
(Illumination Color) in the Initial Setting Menu.
2. Select the desired illumination
color with the 2/3 buttons.
Selecting the Digital Attenuator (Digital Attenuator)
When listening to an MD or other source on which the recording level is high, setting the
equalizer curve level to "High" may result in distortion.
You can switch the digital attenuator to "Low" to reduce distortion. (Sound quality when
the setting is "High" is better than when the setting is "Low", so usually set to "High".)
1. Press the FUNCTION button and select the Digital Attenuator mode
(Digital Attenuator) in the Initial Setting Menu.
2. Select the desired attenuation
level with the 2/3 buttons.
Low Ô High
67
All manuals and user guides at all-guides.com