Checking/Cleaning Dust Filter; Suction Hose Storage - Kärcher KM 100/100 R Bp Guia De Inicio Rapido

4.2.2 Checking/cleaning dust filter

1 Container
2 Wing nut
3 Dust filter
4 Seal
5 Filter bag
Unscrew the wing nut, pull off the dust filter.

Check/clean dust filter, replace if necessary.

Clean seal, apply silicone grease.


4.3 Suction hose storage

DANGER
Risk of accident, risk of injury!
Store the suction hose in the supports when not in use.

ATTENTION
Risk of accident, risk of injury!
Ensure that the suction hose (or parts thereof) does not

protrude the side areas of the cover.
1 Adjustable telescopic suction pipe
2 Telescopic suction pipe
3 Intake
4 Support suction hose
5 Suction hose with handle
6 Cover
Fully push the telescopic suction pipe together and ac-

tuate the adjuster.
Push the telescopic suction pipe into the holder as far

as it will go. The correctly installed stopper protects
against damage.
Store the suction hose between the two supports under

tension as shown.
2
-
EN 5