Maintenance Regulations - geberit ACO 203XL Manual De Instrucciones

Maintenance

Maintenance regulations

Interval
Regularly (before use, at the
start of the working day)
Every six months
After two years at the most
as per specifications on the
service sticker or when the
red and the green LEDs flash
alternately
45035998181011211-1 © 02-2018
968.240.00.0 (01)
Maintenance work
▶ Inspect the pressing tool, rechargeable battery and battery
charger for externally visible defects and damage that
could affect safety.
▶ Clean and lubricate the pressing tool.
▶ Clean pressing attachments and check for defects,
particularly for cracks in the material.
▶ Lubricate the pressing attachments. → See user manual
for the Geberit pressing attachments in question.
▶ Have the battery charger inspected for safety-related
defects or damage by an authorised repair shop.
However, this metrological measurement does not replace
any country-specific regulations and legislation that might
prescribe further checks and maintenance work.
▶ Have an authorised repair shop check the press capacity
and the state of wear.
EN
37