Machine Elements; On-Off Switch - John Bean T 3300-24 Manual Del Operario

2
1
7
8
9
10
11
12
13
16
1
1a
10
3
5
17
15
6
14
1
General
1.5 View of the machine
Fig. 1

Machine Elements

1 Mounting head, vertically adjustable.
2 Lever with push-button (magnified view) to lock mounting
head in its position relative to the rim.
3 Mounting arm, horizontally displaceable.
4 Manual inflator (only for basic versions not BS).
5 Machine post, tiltable pneumatically.
6 Holder of tyre lubricant container.
7 Chuck with clamping jaws.
8 Tyre lever.
9 Pedal – tilting of the machine post.
10 Pedal – clamping jaw movement.
11 Pedal – bead breaker.
12 Pedal – chuck rotation.
Version 2-speed 24
4
Pedal for chuck rotation at two speeds:
– Depress pedal to first stage – 7 rpm – tyres difficult to
handle.
– Fully depress pedal – 14 rpm – tyres easy to handle.
– Lift pedal, backward rotation of chuck at 7 rpm only.
13 Machine dimensions.
14 Bead breaker.
15 At the rear side of the machine the connector for the
manual tyre inflator (only for basic versions not BS).
16 Bead holding device (optional).
17 Pressure gauge - only for BS versions (all), with tool
box (optional).
18 18 MH Pro – pneumatic mounting tool (optional retrofit kit).
For careful clamping of alloy rims and for careful
demounting and mounting of tyres on alloy rims a number
of plastic parts are available as optional extras.

ON-OFF switch

(only for single phase/2 speed versions)
The electrical unit is fitted with an ON-OFF (0-1) switch
(1, Fig.1a) for switching the machine power supply on
and off.
WARNING: SWITCH OFF THE UNIT AT THE END OF
EACH DAY.
Operation manual T 3300-24