Dispensing Hot Water; Dispensing Steam/ Making Cappuccino; Cleaning - Saeco Armonia easy Instrucciones De Uso

Dispensing hot water - Dispensing steam/ making cappuccino
B E F O R E A T T E M P T I N G A N Y
O P E R AT I O N I N VO LV I N G T H E
RELEASE OF STEAM OR HOT WATER,
MAKE SURE THAT THE STEAM TUBE
("PANNARELLO") IS POSITIONED OVER
THE DRIP TRAY.
7

DISPENSING HOT WATER

Danger of scalding! Brief sprays of
hot water may be discharged at first.
The dispensing tube can reach very high
temperatures: avoiding touching it directly
with your hands.
• (Fig.4B) - If the machine is off, turn it on by
pressing the ON/OFF switch (2); the light (3)
will go on.
• Wait until the temperature ready light (5) goes
on.
• (Fig.17) - Place a container or mug beneath
the steam tube ("pannarello").
Turn the "Hot water/steam" knob (7)
counterclockwise to open.
• (Fig.18) - Press the coffee button (4) to
dispense hot water.
• When you have dispensed the desired quantity
of hot water, press the coffee button (4)
again.
• (Fig.19) - Turn the knob (7) clockwise to
close. Remove the container of hot water.
8 D I S P E N S I N G S T E A M /
MAKING CAPPUCCINO
Danger of scalding!
The steam may be preceded by brief
sprays of hot water. The dispensing tube
can reach very high temperatures: avoiding
touching it directly with your hands.
• (Fig.4B) - If the machine is off, turn it on by
pressing the ON/OFF switch (2); the light (3)
will go on.
• Wait until the machine ready LED (5) lights
up.
• (Fig.20) - Press the (6) steam switch. The
temperature ready light will go off (5).
• Wait until the temperature ready light (5)
goes back on. Now the machine is ready to
dispense steam.
• (Fig.17) - Place a container beneath the
steam tube and open the "Hot water/
steam" knob (7) for a few seconds to di-
scharge residual water from the steam tube
("pannarello"). Shortly only steam will issue
from the tube.
• (Fig.19) - Close the knob (7) and remove
the container.
• Fill the container you want to use for making
cappuccino to 1/3 with cold milk.
For best results, use only cold milk
when making cappuccino.
• (Fig.21) - Place the tip of the steam tube in
the milk to be heated and turn the knob (7)
counterclockwise; move the container slowly
up and down and in circles to heat the milk
evenly.
• (Fig.22) - After frothing the milk as desired,
turn the knob (7) clockwise to shut off steam.
Remove the cup with frothed milk.
• (Fig.20) - Press the steam switch (6) again.
• Load the circuit as directed in section 4.5 to
prepare the machine for use.
The same method may be used to
heat other beverages.
• (Fig.23) - After completing this operation,
wipe the steam tube clean with a damp
cloth.
9

CLEANING

Maintenance and cleaning jobs may be
carried out only when the machine is cold and
disconnected from the power supply.
• Do not immerse the machine in water nor
place any of its components in a dish-
washer.
ENGLISH
• 25 •