Toro Power Plex 51130 Manual Del Usuario página 19

Problem
1 LED indicator is blinking on the battery
pack.
It is difficult to remove the battery pack
from the tool.
Possible Cause
1. The battery pack is low voltage.
1. The battery pack/tool is new or there
is corrosion in the battery terminals
and/or the terminals on the tool.
18
Corrective Action
1. Place the battery pack on the charger.
1. Clean the terminals on the battery pack
and the tool. Then apply dielectric
grease to the battery terminals; do not
use any other type of lubricant as it can
damage the terminals.