Toro Power Plex 51130 Manual Del Usuario página 4

D. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
E. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.
F. Keep your hands and feet away from the
cutting area.
3. Power tool use and care
A. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
B. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
C. Remove the battery pack from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
D. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
E. Store idle appliances indoors. When not
in use, appliances should be stored indoors
in a dry and high or locked-up place, out of
the reach of children.
F. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts, and any other
condition that may affect the operation
of power tools. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
G. Maintain appliance with care. Keep
cutting edge sharp and clean for best
performance and to reduce the risk of
injury. Follow instructions for lubricating and
changing accessories. Keep handles dry,
clean, and free from oil and grease.
H. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
I. Use the power tool in accordance with
these instructions and in the manner
intended for the particular type of power
tool, taking into account the working
conditions and the work to be performed.
Using the power tool for operations different
from those intended could result in a
hazardous situation.
J. Keep guards in place and in working
order.
K. Check for damaged parts. Before using
the appliance, carefully check a guard or
other part that is damaged to determine
that it will operate properly and perform
its intended function. Check for alignment
of moving parts, binding of moving parts,
breakage of parts, mounting, and any other
condition that may affect its operation. A
guard or other part that is damaged should
be properly repaired or replaced by an
authorized service center unless indicated
elsewhere in this manual.
4. Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
5. Battery Safety
A. Do not charge appliance in rain or in wet
locations.
B. Do not use battery-operated appliance in
the rain.
C. Use only the following type and size
battery(ies): Toro battery Model 88525 or
88526.
D. Remove or disconnect the battery before
servicing, cleaning, or removing material
from the gardening appliance.
E. Do not dispose of the battery(ies) in a
fire. The cell may explode. Check with
local codes for possible special disposal
instructions.
F. Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
G. Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and keys.
The battery or conductor may overheat and
cause burns.
SAVE THESE INSTRUCTIONS
3