Door Conversion - THOMSON THLR 600 Manual De Instrucciones

Note: Keep the condensation channel and drainage hole clean, so that the condensation can run out.
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local
authorised service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is
recommended to use a crosshead screwdriver and a spanner (both not supplied).
1. Remove the top cover by removing the screw covers and then screws from the top cover.
2. Remove the ornament cover of the top cover and install it on opposite side. Set top cover aside.
3. Remove the screws that hold the upper hinge to the frame. Remove the upper hinge.
4. Remove the levelling feet and screws that hold the lower hinges and remove the lower hinges.
5. Lift refrigerator door off the lower hinge and set aside.
6. Remove the screw from the plate at the bottom of the refrigerator door and tighten the screw to the
bottom plate on opposite side.
9
9