Rotary Mode; Scan Mode - LaserLiner AutoLite-Laser Green Manual De Instrucciones

Operation of the AutoLite-Laser:
1. Point mode
To establish point mode, press button (P) repeatedly until the laser no
longer rotates. The laser can then be precisely positioned to the measu-
ring level with the direction buttons (L).

2. Rotary mode

Use button (P) to set the desired speed of rotation: 0, 60, 120, 300, 600
rpm.

3. Scan mode

Button (I) can be used to activate and set an intensive light segment
with one of 4 different widths. The segment can be positioned with the
direction buttons (L).
4. Hand receiver mode
Working with the optional laser receiver: Use button (P) to set maximum
rotary speed, 600 rpm. This allows optimal use of the unit in combination
with the laser receiver. Hand receiver mode is activated on the SensoLite unit
with its button (10).
auto
5. Manual Slope function
man
Use button (K) to deactivate automatic levelling. This allows slopes to be set.
The X and Y axes can be adjusted separately (i.e. independently of one anot-
her) in this mode.
TIP: Perform operations with the remote control unit so that the AutoLite's
physical position is not altered.
In 1 plane In 2 planes
ENGLISH
AutoLite-Laser Green
X
Y
auto
man
X
Y
15