Other Automatic Flash Shooting; Mode - Rollei 56 Manual De Instrucciones

Other Automatic Flash Shooting Mode
56
Set the camera's shooting mode to <AV/A>(Aperture priority AE), <TV/S> (Shutter
priority AE) or <M> (Manual) and you can use E-TTL / i-TTL auto flash .
TV/S Select this mode when you want to set the shutter speed manually . The
camera then autmatically set the aperture matching the shutter speed to
obtain a standard exposure . If the aperture display blinks, it means that
the background exposure will be underexposed or overexposed . Adjust
the shutter speed until the aperture display stops blinking .
AV/A
Select this mode to manually set the aperture value . The camera is au-
tomatically set to match the aperture shutter speed to achieve standard
exposure . If the background is dark (such as at night), a slow sync speed
will be used to obtain a standard exposure of both, the main subject and
background .
Use the MASTER flash for the standard exposure of your subject . Use the
slow shutter background exposure standards . Since a slow shutter speed
will be used for low-light scenes, using a tripod is recommended . If the
shutter speed display blinks, the background will be under- or overexpo-
sed . Adjust the aperture until the shutter speed display stops blinking .
M
Select this mode if you want to set both, the shutter speed and the
aperture manually . Use the MASTER flash for standard exposure . The
exposure of the background is obtained with the shutter speed and
aperture combination you have set .
If you use the <DEP> or <A-DEP> shooting mode, the result will be the same as
using the <P> (Program AE) mode .
ENGLISH