Multi Mode (Stroboscopic) - Rollei 56 Manual De Instrucciones

Multi Mode (Stroboscopic)

58
Use this mode to light a moving subject such as
a golf swing, with rapid short-burst pulses of light
to capture the subject in successive positions on
one frame .
1 . Press the mode button until "Multi" appears
on the top line of the display .
2 . Set the frequency of the flash (number of times per seconds that the light will
flash during each firing of the light) by pressing the center button of the keypad .
3 . Set the frequency in hertz (HZ) by pressing the center button key . The available
frequency is form 1-199 HZ .
4 . Press the center button of the keypad to store the number .
5 . Set the output power by pressing the left and right button .
The relational table of flash power and times of flashes
Flash power
Times of flash
Shutter speed = Times of flash ÷ Flash frequency (Hz)
ENGLISH
1/128 1/64
1–40 1–20
1/32 1/16
1–12 1–8
1/8 1/4
1–4 1–2