Bounce Flash - Rollei 56 Manual De Instrucciones

Bounce Flash

76
If the flash head is pointed to the wall or ceiling, the flash will be reflected by the
wall . If this is illuminating then the subject, this can help to reduce shadows around
the subject and get more natural effects .
Adjust the flash head tilt, rotation angel and
select the reflection plane
If the Flash Units' head is pitched up so that the
ceiling is used as a reflection plane, this can have
a good effect .
White Ceiling
Please pay attention: Don't let the Flash Unit head
directly shine to the body of a person .
The effective distance between the Flash Unit head and the reflection plane should
be about 1 m to 2 m . If colour photos are taken, please choose a white or strong
reflection for flashing .
Using the Built-In Refecting Card
The built-in reflecting card ensures that the subject
will be brighter, sharper and it avoids a direct
lighting in front of the subject .
1 .) Rotate the flash head of up to 90 degrees .
2 .) Pull out the wide panel and reflecting card .
1 .) 2 .) 3 .)
3 .) Pull in the wide panel and only leave the
reflecting card outside .
ENGLISH