Slave Flash Mode - Rollei 56 Manual De Instrucciones

SLAVE Flash Mode

SLAVE flash mode can be divided into:
• Wireless instruction mode (SLAVE c/SLAVE n )
• Wireless optical flash mode
Press the [button A] so that the flash light will shift to Slave C, Slave N, S1, S2 .
SLAVE c
S1
Note:
1 . In the SLAVE mode there is no need for the AF assist light flash . Therefore you
can turn the lamp off through the custom function (Fn-08) .
If you exit the wireless Slave Mode and you need the focus lamp in normal
mode, you need to turn it on again in the custom settings .
2 . The flash which is in SLAVE mode will not go into the sleep mode to ensure that
all information from the MASTER flash can be well received .
SLAVE n
S2
69