Diffuser; Accessories - Rollei 56 Manual De Instrucciones

Use the Built-In Wide Angel Diffuser
This is used if you want to have a wider flash light (flare light) .
1. Pull out wide diffusion plate
Slowly pull completely out the wide diffusion
plate .
2. Push the reflector plate
Then push the reflector plate back again into
the flash head .
Using the Diffuser:
Attach the diffuser on the Flash Unit . The light will
be softer which will help to get no shadow . This
can be used in landscape as well as portrait format .
The best effect can be achieved if the Flash Unit
head has a position of 60 degrees .

Accessories:

1 . Flash x1
2 . Protective bag x1
3 . Micro base x1
4 . User manual x1
5 . Diffuser x1
6 . USB upgrading cable x1
77