Explanation Of Signs Used; Highlighting Of Designations And Markings - Hilti GX 2 Manual De Instrucciones

1 Information about the documentation

1.1 Explanation of signs used

1.1.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The
following signal words are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that could lead
to serious personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead
to slight personal injury or damage to the equipment or other property.
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Draws attention to instructions or other useful information.
General obligation sign
Wear eye protection.
Wear ear protection.
Wear a hard hat.
Return waste material for recycling.
1.1.3 Illustrations
The illustrations in these operating instructions are intended to convey a basic under-
standing and may differ from the actual version of the product:
The illustrations at the beginning of this documentation are numbered with these
numbers; in the text in these operating instructions these numbers refer to the
applicable illustration.
Item reference numbers are used in the overview illustration. In the product
overview section, the numbers shown in the legend relate to these item refer-
ence numbers.

1.1.4 Highlighting of designations and markings

Designations and markings are indicated as follows:
‚ ‛ Description of marked operating controls on the fastening tool
« » Markings on the fastening tool
1.2 About this documentation
▶ It is essential that the operating instructions are read before initial operation.
▶ Always keep these operating instructions together with the power tool.
1