Removing Foreign Objects From The Area Of The Fastener Guide; Caring For The Fastening Tool; Cleaning The Fastening Tool - Hilti GX 2 Manual De Instrucciones

5. Slide the fastener guide into the slot in the nose of the fastening tool until it is heard
to engage.
6. Check that the fastener guide is seated correctly.
8.7 Removing the support leg
1. Release the support leg engaging mechanism by pressing lightly.
2. Pivot the support leg until it can be withdrawn from the locating groove.
8.8 Fitting the support leg
1. Insert the support leg in the locating groove.
2. Pivot the support leg downwards until it engages.
9 Remedying possible malfunctions

9.1 Removing foreign objects from the area of the fastener guide

1. Remove the battery. → page 9
2. Remove the gas can. → page 9
3. Unload the magazine. → page 9
4. Remove the magazine. → page 9
5. Remove the fastener guide. → page 10
6. Remove all foreign objects from the area of the fastener guide.
7. Insert the fastener guide. → page 10
8. Fit the magazine. → page 10
10 Care and maintenance

10.1 Caring for the fastening tool

▶ Clean the fastening tool with a cloth at regular intervals (see also → page 11).
▶ Keep the grip areas free from oil and grease.
▶ Do not use spray equipment, pressure jet washers or running water for cleaning.
▶ Do not use cleaning agents containing silicone.
▶ Do not use sprays or similar lubricating and cleaning agents.
▶ Never operate the fastening tool if the cooling air slots are blocked.

10.2 Cleaning the fastening tool

Note
The fastening tool must be cleaned and serviced regularly. We recommend that a
cleaning service is carried out, at the latest, after driving 25,000 fasteners.
▶ Clean the fastening tool, or have it cleaned, if malfunctions such as misfiring occur
increasingly.
▶ For cleaning, use the cleaning set (available as an accessory) and observe the
illustrated cleaning instructions enclosed with it.
10.3 Maintenance
▶ To help ensure safe and reliable operation, use only genuine Hilti spare parts and
consumables. Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Center or online at: www.hilti.com.
11