Technical Data; Symbols And Icons; Symbols On The Device - Grizzly Tools BRM 56-161 BSA Q-360 Traducción Del Manual De Instrucciones Original

10 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust
15 Lateral ejection with impact
protection
prevents the lateral ejection of
lawn cuttings and solid parts
and strings up the lawn cuttings
from the side.

Technical data

Petrol lawn mower
..........................BRM 56-161 BSA Q-360°
Performance .................................2.61 kW
Engine 4-stroke ..............Briggs & Stratton
Engine size ................................... 161 cm
Blade rotation speed n
Blade torque ...........................max. 45 Nm
Wheel drive.......................... aprox. 3 km/h
Petrol tank volume .............................. 1.0 l
Octane rating ....................................95-98
Engine oil tank volume ................... 600 ml
Motoroil ..................HD SAE 30 or 10W-30
Spark plug ................. Champion QC12YC
Cutting width ................................. 560 mm
Cutting height .............. 6-steps, 25-75 mm
Grass collection box volume................ 75 l
Weight ........................................... 38,5 kg
Sound pressure level
(L ) .................. 82.5 dB (A), K
pA
Sound power level (L
measured .....96.62 dB (A); K
guaranteed ...............................98 dB(A)
Vibration (a ) at the handle
h
...........................5.569 m/s
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
DOV750EX
............ 2900 min
0
=2.5 dB
pA
)
WA
=0.91 dB
WA
; K=1.5 m/s
2
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
3
on but running without any load).
-1
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.

Symbols and icons

Symbols on the device

2
Attention!
Read the instruction manual.
Risk of injury from parts being
flung out.
Keep bystanders away from the
equipment.
GB
81