Waste Disposal And Environmental Protection; Technical Specifications - Grizzly Tools ERM 1637-3 Stow Traducción Del Manual De Instrucciones Original

2. Fold out the bow-type handle
(1) and the lower bar (4) over
the device housing (10).
Make sure that the cables do
not become trapped.
3. You can also place the device
upright in the stow position with
the bow-type handle (1) folded
either in or out
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center. Be environ-
mentally friendly. Return the tool, acces-
sories and packaging to a recycling
when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.

Technical Specifications

Electric Lawnmower
Motor input power
Mains voltage
Protection class
Protection type
Idling speed
Cutting circle ....................................37 cm
Cut height
Weight .........................................ca. 15 kg
Lawn bag volume
Sound pressure specification
(L ) .........................88 dB(A), K
pA
Noise level specification
guaranteed............................... 96 dB(A)
measured
Vibration (a
This device is designed for operation on a
power supply network with a system impe-
dance Z
max
connection) of a maximum of 0.313 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system impe-
centre dance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
..ERM 1637-3 Stow
......................... 1600 W
.............. 220-240 V~, 50 Hz
...................................II
...................................IPX4
...............................3450 min
.................................. 25-75 mm
.................................35 l
(L
WA
.......93,1 dB(A), K
) ...............................≤ 2.5 m/s
h
at the transfer point (domestic
GB
-1
= 3 dB
pA
)
= 2.05 dB
WA
2
27