After-Sales Service - MSA GAG Serie Manual De Instrucciones

FRONT PLATE
8
• Remove the plate (2 screws).
Note:
The front plate can be removed at any time when
dismantling, taking care to protect the face shield
with a soft cloth.
KITFIX
9
• Remove the pin by means of pliers, making sure
to protect the shell with a soft cloth.
• Remove the Kitfix.
Your helmet is a category-3 item of individual protection equipment. It must be inspected
regularly, at least every 2 years, by an authorised technician. For further information, get in
touch with your distributor.
■
Inspect each part of the helmet after each use, and all fixing points in particular.
● correct anchorage
■
Make sure that the helmet is always correctly adjusted.
Use only genuine MSA GALLET parts to replace damaged elements, because they are the only
approved parts, and ensure the helmet meets the required standards.
All our models, accessories and spare parts are scrupulously checked before leaving the
factory.
MSA GALLET‚ helmets and optional accessories come with a 2-year guarantee, including spare
parts and labour, from the date of purchase, for any malfunction that may occur, subject to
observance of the terms and conditions set out in this manual.
FRONT PLATE
KITFIX

AFTER-SALES SERVICE

Maintenance, Spare parts
● no visible wear ● no breakage
WARRANTY
The Safety Company
GB
21