Kit Assembly - Metra 99-7616 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Cut and remove the center support
out of the radio opening.
2. Attach the radio brackets to the
radio trim. (Figure A)
3. Slide the pocket and aftermarket
radio into the assembly (from
behind) and secure with the
screws supplied with the radio.
(Figure B, Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
(Figure C)
99-7616
Double DIN radio provision
1. Cut and remove the center support
out of the radio opening.
2. Attach the radio brackets to the
radio trim. (Figure A)
3. Slide the aftermarket radio into the
radio opening (from behind) and
secure with the screws supplied
with the radio. (Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)