Assembly; Before The First Use - Kitchen Living CYD-60A-V Manual Del Usuario

6 Qt. Pressure Cooker

ASSEMBLY

BEFORE THE FIRST USE

1. Unpack the pressure cooker from the box.
2. Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
3. Save these instructions, warranty card, and receipt in a safe place for
future reference.
4. Wipe clean all the parts with a soft damp cloth or sponge and warm water.
Rinse and dry thoroughly. DO NOT IMMERSE THE PRESSURE COOKER
HOUSING OR LID IN WATER OR ANY OTHER LIQUID.
DO NOT USE ANY ABRASIVE MATERIALS TO CLEAN THE SURFACE
DO NOT IMMERSE THE PRESSURE COOKER HOUSING OR LID INTO
WATER AT ANY TIME
5. Make sure the rubber gasket is seated properly inside the lid. The gasket
creates an air tight seal that is needed to ensure the pressure cooker
operates correctly. See below:
Gasket
6. Attach the condensation cup to the rear of the housing and click it into
place. See below:
4
888-367-7373
AFTER SALES SUPPORT
customer-service@wk-usa.com
ASSEMBLY