Kitchen Living CYD-60A-V Manual Del Usuario página 5

6 Qt. Pressure Cooker
7. To ensure the correct fitting of the rubber gasket, fill the removable
cooking pot with approximately 11 cups of water. Place the lid on the unit
and turn it counter clockwise until it clicks securely in place in the locked
position (see photos on page 10). Make sure the VENT knob is in the SEAL
position. Press the PRESSURE/STEAM button repeatedly until the display
reads 00.45, then the HIGH PRESSURE button,
then the START button. The display will scroll until the correct pressure is
reached and then it will start counting down. The unit will beep when it is
finished. Press the CANCEL button and let it sit for 20 minutes or more
before turning the VENT knob from SEAL to EXHAUST to release the
steam. Use extreme caution, and oven mitts or other protection when
turning the vent knob as hot steam and liquid could be released. Once the
steam is released the floating valve will drop and you may carefully open
the lid. Let the pressure cooker cool to room temperature before emptying
and cleaning.
8. Please note: the setting will reset quickly (approximately 5-10
seconds) if you don't press the CANCEL/START button.
9. Before using the pressure cooker each time be sure to check that the
rubber gasket, floating valve, and vent knob are clean and positioned
properly. If you receive a PE code it means the pressure cooker cannot
build up pressure. Please check the gasket and make sure the steam valve
is closed.
AFTER SALES SUPPORT
888-367-7373 customer-service@wk-usa.com
ASSEMBLY
5