Measurement Mode Configuration; Vfl Configuration (920Xc-20C Only) - Textron GREENLEE 920XC-13A Manual Del Usuario

Section 3
24
All manuals and user guides at all-guides.com

Measurement Mode Configuration

There are two kinds of measurement mode: averaging and realtime. Under realtime mode the
920XC will undertake realtime measurement for the connector of exterior fiber and refurbish the
measure.trace..While.under.realtime.mode,.press.Run/Stop.to.stop;.otherwise.it.will.measure.
continuously. Under Averaging mode the tool will average the data within the measure time, which
is.set.by.the.user..When.exceeding.the.set.time,.it.will.stop.automatically.and.display.the.result..In.
general, averaging is the preferred mode.
Under the parameter configuration menu use p.and.q to highlight "Meas. Mode." Press Enter.to.
select "Averaging" or "Realtime" mode (Figure 3-14). Press
Figure 3-14. Measurement Mode Configuration

VFL Configuration (920XC-20C only)

Under the parameter configuration menu use p.and.q to highlight "VFL." Depending on
demand,.press.Enter to select "CW," "1Hz," or "Off." Press
will.be.displayed.under.the. icon in the menu bar on the right (Figure 3-15).
Figure 3-15. VFL Configuration
.to.exit.
to exit. When VFL is on, .
Greenlee / A Textron Company
.