Important Safety Information
All manuals and user guides at all-guides.com
Electric shock hazard:
•
Do not expose batteries to fire or intense heat. Do not open or mutilate batteries. Avoid
touching the electrolyte in the batteries, which is corrosive and may cause damage to eyes
or.skin.
•
Do not open the case of the unit for any reason. It contains no user-serviceable parts.
•
Use this unit for the manufacturer's intended purpose only, as described in this manual.
Any other use can impair the protection provided by the unit.
Failure to observe these precautions may result in injury and may damage the unit.
Instrument damage hazard:
•
Make sure that the optical fiber or cable is not in use and there is no laser beam in
the fiber before testing with this unit.
•
Do not leave the unit in direct sunlight or near direct sources of heat.
•
Protect.the.unit.from.strong.impacts.or.shock.
•
Do.not.immerse.the.unit.in.water.or.store.in.areas.with.high.humidity.
•
When necessary, clean the case, front panel, and rubber cover with a damp cloth.
Do not use abrasives, harsh chemicals, or solvents.
•
Replace the protective dust cap when the unit is not in use.
•
Store.the.unit.and.interface.adapters.in.a.cool,.dry,.and.clean.place..
Failure to observe these precautions may result in injury and may damage the unit.
Electric shock hazard:
•
Do.not.expose.the.unit.to.extremes.in.temperature.or.high.humidity..Refer.to.
"Specifications."
•
Turn.the.unit.off,.disconnect.from.power,.and.make.sure.the.laser.source.is.off.before.
cleaning.
Failure to observe these precautions may result in injury and may damage the unit.
Greenlee / A Textron Company