Save Trace; Ascii Format Output; Edit Optical Fiber Information - Textron GREENLEE 920XC-13A Manual Del Usuario

All manuals and user guides at all-guides.com
Trace Viewer Software
Review Events List
The trace curve decreases at a fixed slope. Any sudden peak or drop should be considered an
event. The 920XC acquires measured data automatically and creates the events list (Figure 7-17).
Figure 7-17. Review Events List
For details relating to the events list, refer to "Events List Window" in this section.

Save Trace

Opened trace files can be saved in the same manner as other files. Click "save trace file" under the
"File" menu to save a trace with an existing file name. Click "save as trace file" under the "File"
menu to save a trace with a new file name.

ASCII Format Output

OTDR trace files cannot be opened with any third-party software. However, the Trace Viewer
software provides a software interface so that data can be exported in ASCII format and then
opened and viewed by a third-party application.
Select "ASCII format output" under the "File" menu (Figure 7-18). Select the information and
format,.and.then.press.Enter to choose the path and file name.
Figure 7-18. ASCII Format

Edit Optical Fiber Information

Select "Edit information of optical fiber" under the "Edit" menu, or click .to.start.editing.
optical fiber information (Figure 7-19). Information of optical fiber is a description of
measurement trace displayed in the trace window. Users input relevant information for efficient
management of measurement files. Upon completion of editing, press Enter to confirm.
Figure 7-19. Edit Optical Fiber Information
55
920XC-13A • 920XC-15A • 920XC-20C Instruction Manual