Default.setting; Help - Textron GREENLEE 920XC-13A Manual Del Usuario

All manuals and user guides at all-guides.com
Basic OTDR Information
Default Setting
This function is used to set the OTDR parameters to factory settings. These parameters include:
range, pulse width, average time, IOR, non-reflection threshold, reflection threshold, end
threshold, and scatter coefficient.
Under the parameter configuration menu use p.and.q to highlight "Load Default." Press Enter.
to enter (Figure 3-28). Press .to.exit.
Figure 3-28. Default Setting
Use.p.and.q to highlight "Yes" or "No." Press Enter to confirm.

Help

The Help function provides access to the quick reference screen.
Under the parameter configuration menu use p.and.q to highlight "Help." Press Enter.to.display.
the quick reference screen (Figure 3-29). Press .to.exit.
Figure 3-29. Help
31
920XC-13A • 920XC-15A • 920XC-20C Instruction Manual