Appendix A. Quick Reference Guide And Menu Shortcuts - Textron GREENLEE 920XC-13A Manual Del Usuario

Appendix A.
Quick Reference Guide and Menu Shortcuts
Before connecting fiber, note whether
the connector on your 920XC is APC
or UPC, and make sure the connector
on your jumper is the same type.
Permanent damage to the 920XC will
result if they are mismatched.
Clean the fiber connector and
bulkhead on the 920XC.
Connect fiber. Note that different
types of connectors have unique
mating requirements.
920XC-13A • 920XC-15A • 920XC-20C Instruction Manual
All manuals and user guides at all-guides.com
Acquire and View Trace
A/B Cursor Control
Expand and Contract Trace around Highlighted Cursor
1-00-642-2155 or 1-760-59-900
www.greenlee.com
Press to turn on the 920XC.
Use.to.highlight. .in.the.menu.bar.and.press.Enter..
Select range (usually auto), wavelength, and measure
mode (usually averaging). Refer to the Instruction
Manual.for.additional.parameters.
Press once to acquire a trace.
Hold.the.Shift.key.and.press.Enter.to.step.forward.
+
through the events list.
Hold.the.Shift.key.and.press. .to.step.backward.
+
through the events list.
Beginning of fiber
Reflection event
Attenuation event
End of fiber
Press to step through the information windows:
• Events list.
•. Marker.A/B.information.
•. Fiber.information.
•. Measurement.trace.parameters.
•. Analysis.trace.parameters
Use.to.highlight.A/B.in.the.menu.bar..Press.Enter.to.
switch.between.A.and.B.cursor.
Use to move selected cursor left or right.
Hold.the.Shift.key.and.press.p.to.expand..
+
the trace vertically.
Hold.the.Shift.key.and.press.q.to.contract..
+
the trace vertically.
Hold.the.Shift.key.and.press.t.to.expand..
+
the.trace.horizontally.
Hold.the.Shift.key.and.press.u.to.contract..
+
the.trace.horizontally.
63