Scatter Coefficient Configuration; Non-Reflection Threshold Configuration - Textron GREENLEE 920XC-13A Manual Del Usuario

Section 3
26
All manuals and user guides at all-guides.com

Scatter Coefficient Configuration

Scatter coefficient determines the value of backscatter power. This configuration affects the
calculation of reflection value.
Under the parameter configuration menu use p.and.q to highlight "Scat. Coef." Press Enter.to.
enter a value (Figure 3-18). Press
Figure 3-18. Scatter Coefficient Configuration
Use.t.and.u to adjust the position of the highlighted area. Use p.and.q.to.change.the.digits..
After.setting,.press.Enter to confirm.

Non-reflection Threshold Configuration

This configuration has direct impact on the listing of insertion loss events. Only events ≥ to this
threshold.will.be.listed.
Under the parameter configuration menu use p.and.q to highlight "Nrefl. Thre." Press Enter.to.
enter a value (Figure 3-19). Press
Figure 3-19. Non-reflection Threshold Configuration
Use.t.and.u to adjust the position of the highlighted area. Use p.and.q.to.change.the.digits..
After.setting,.press.Enter to confirm.
Note: The default setting is "0.20 dB."
.to.exit.
.to.exit.
Greenlee / A Textron Company