Alter Measurements In Realtime Testing (920Xc-20C Only) - Textron GREENLEE 920XC-13A Manual Del Usuario

Section 4

Alter Measurements in Realtime Testing (920XC-20C only)

40
All manuals and user guides at all-guides.com
To alter measurements in realtime testing, follow these steps:
1.. Use.p.and.q.to.highlight.
A.parameter.box.will.appear.at.the.bottom.of.the.screen.
2.. Use.t.and.u to move to the parameter to be changed (Figure 4-9), and then press Enter.
3.. Use.p.and.q to change the Ref value. Select "Averaging" to choose Averaging testing.
4. Press "OK" to exit the parameter configuration menu.
Figure 4-9. Alter Measurements in Realtime Testing
(i.e., parameter configuration), and then press Enter...
Greenlee / A Textron Company