STARTING OPERATION
Power supply
This scales operates on 2 x 1.5 V LR3/AAA bat-
teries (total of 3 V).
1
Open the cover of the battery compartment
.
I
2
Insert the 1.5 V LR3/AAA batteries. When
doing so, pay attention to the polarity
markings in the bottom of the battery
compartment.
3
Close the cover of the battery compartment
.
I
Notes
Do not expose the batteries to extreme heat
7
e.g. direct sunlight, heaters, fire, etc.
When the batteries are weak, »
7
appear in the display. Replace the batteries
immediately.
Remove the batteries when they are flat or
7
when you know that the device will not be
used for a longer period of time. No liability
will be assumed for damage incurred as a
result of leaking batteries.
Environmental note
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed of
with household waste. Please dispose of used
batteries in an environmentally sound manner.
Find out about the legal regulations which
apply in your area.
16 ENGLISH
______________________
Operating as a scales
Notes
7
7
7
1
2
3
« will
LO
4
5
Note
7
You do not need to enter any data for measur-
ing your body weight.
The scales measures your weight in increments
of 100 grams.
It uses a very precise 4 point measurement.
On the bottom of the scales, use the switch
to select between Imperial (st/lb/in) and
H
European measurements (kg/cm).
Position the scales on a smooth, flat surface.
Activate by tapping your foot once on the
scales in the bottom right corner of the glass
surface
.
F
– Display: »
« appears on the LCD screen
888
.
E
As soon as the display shows »
carefully step on the scales.
Stand still on the glass surface until the weight
displayed flashes twice and then no longer
changes.
– Your body weight is shown in the display.
– After about 5 seconds, the scales
automatically switches off.
If the »
« display appears during weigh-
0-LD
ing, the scales is overloaded. After about
5 seconds, the scales automatically switches
off.
888
kg «
0. 0
0. 0
kg