Grundig PS 5110 Manual Del Usuario página 17

OPERATION _______________________________
Operating as a body analyser
The measurement and data is transmitted
through your bare feet, which are postioned on
the measuring electrodes
that both feet are placed on the scales properly.
Entering your data
When you use the body composition analysis
function for the first time, select the following
data and then enter the following information:
your user parameter (from 01 to 12), your gen-
der, your height (75 – 215 cm), your age (10-
99) and activity level (select from A 1 to A 4).
Notes
After entering the initial data, you will not
7
have to press the
C
next time you use the scales. Simply select the
corresponding parameter (01 to 12) using the
▲ and
▼
B D
During data entry, if no button is pressed for
7
more than 20 seconds, the scales automati-
cally switches off. You must then start from the
beginning.
Entering parameters
1 Position the scales on a smooth, flat surface
and activate it. To do this, tap your foot once
on the scale in the bottom right corner of the
glass surface .
F
– Display: » « appears on the LCD screen
888
.
E
2 Press the button as soon as »
C
appears in the display.
– Display: » « flashes.
. Therefore, ensure
A
button again the
buttons.
888
kg«
0. 0
Note
The selection 01 is described below as an
example.
01
3
Select the desired user parameter (01 to 12)
using the and
▼
B
confirm your selection with the
– The symbol flashes.
01
4
Confirm the selection of a male user with the
button.
C
– Display: The height flashes.
01
5
Set the height with the
buttons and confirm your selection with the
button.
C
– Display: The age flashes.
01
▲ buttons and
D
button.
C
A 1
170 30
CM AGE
CM AGE
A 1
170 30
CM AGE
CM AGE
and ▲
▼
B D
A 1
169 30
CM AGE
CM AGE
ENGLISH 17