Design And Function; Transport, Packaging And Storage; Transport; Packaging - WIKA 6 Serie Manual De Instrucciones

4. Design and function / 5. Transport, packaging and storage

4. Design and function

Description
Nominal size 100 and 160 mm
„
The instruments measure the pressure by means of resilient capsule pressure
„
elements.
The measuring characteristics are in accordance with the EN 837-3 standard.
„
The case is equipped with a blow-out device in the case back and therefore
„
meets the safety level "S1" per EN 837-1.
Scope of delivery
Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport

Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g.
change in installation site, sending for repair).

5.3 Storage

Permissible storage temperature
-40 ... +70 °C
WIKA mode d'emploi manomètre, type 6 selon ATEX
FR
15