Design And Function; Installation Example; Scope Of Delivery - WIKA 910.70 Manual De Instrucciones

2. Design and function

2. Design and function

2.1 Installation example

Sensor
Diaphragm
seal
2.2 Description
After connection to the power supply, the indicator will initialise independently. As soon
as the LED lights up green continuously, the indicator is ready for use. A flashing LED
indicates that the output signal is either above or below the scale range. From the
pointer position, the operator can immediately know whether the indicator is working
correctly.
The 910.70 indicator is optionally available with a 4 ... 20 mA output signal. With this
option, the measurement can be evaluated away from the measuring point, e.g. at a
PLC. The optional analogue output requires no additional adjustment and outputs the
sensor signal as 4 ... 20 mA.

2.3 Scope of delivery

Cross-check scope of delivery with delivery note.
WIKA operating instructions indicator for panel mounting, model 910.70
Sensor cable
Analogue display
LED
Power supply
DC 24 V
Supply line
Analogue output
(optional)
EN
e.g. for SPS
4 ... 20 mA
5