Product Description; Specifications - Shindaiwa LE242/EVC Manual Por Propietario/Operador

Product Description

Using the illustration as a guide, famil-
iarize yourself with your machine and
its various components. Understanding
your machine helps ensure top per-
formance, long service life and safer
operation.
attachment shield
Edger blade

Specifications

Engine model
Dr y weight (Including attachments)
Engine type
Bore x stroke
Displacement
Maximum power
Recommended idle speed
Fuel/oil ratio
Carburetor type
Fuel tank capacity
Ignition
Spark plug
Electrode Gap
Torque
Air cleaner type
Starting method
Stopping method
Transmission type
EPA Emission Compliance Period**
Specifications are subject to change without notice.
All manuals and user guides at all-guides.com
Cutting
Outer tube
Gearcase
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating
hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours
(Intermediate) and A = 300 hours (Extended).
* The NGK BPMR6A also meets the requirements for electro magnetic compliance (EMC).
Throttle lock
lever
Ignition switch
Handle
modifications or alterations to any of
these units or their components.
SF242E
5.8 kg / 12.8 lb.
2-cycle catalyst
33 x 28 mm / 1.3 x 1.1 in.
23.9 cc / 1.5 cu. in.
1.0 HP/0.8 kW @ 8000 min
3,000 (±250) min
50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
Walbro WYK, diaphragm-type
670 ml / 22.3 oz.
One-piece electronic, transistor contolled
NGK BPMR6A
0.6 - 0.7 mm / .024 -.028 in.
170 - 190 kg cm / 16.7 - 18.6 N∙m
Foam, non reversible
Recoil
Slide switch
Automatic, centrifugal clutch w/bevel gear
Category A
Grip
Fuel tank
Accelerator
lever
WARNING!
Do not make unauthorized
(rpm)
-1
(rpm)
-1
5