EdmoLift AL Manual De Productos página 160

EdmoLift Products Manual
Introduction
1
IMPORTANT! Before using this product, the manual should be read thoroughly! It is essential for ensuring
safe operation of the product and in achieving optimum operational reliability and long life.
Only authorized personnel should use this product!
An accident must never occur due to lack of knowledge of the functionality or safe operational methods of the
product! To avoid accidents directives and safety regulations must be followed.
Lift tables, Armlifts, Pallet lifters, Tilts and TZ/EZ-Trolleys
2
Our products are designed and manufactured to be safe, reliable and durable work equipment. As standard units,
EdmoLift lift tables, TZ/EZ trolleys, armlifts and tilts comply with the basic requirements in accordance with Lift Table
Standard, EN 1570. This European standard dictates the safety requirements for lift tables that are used for raising
and/or lowering of material and/or persons that are needed for transporting goods that are transported by the lift table,
up to a vertical travel of 3.0 m.
NOTE ! These products are intended for the transport of goods and not for movement of persons.
Both power operated and manually operated lift tables are included, whether stationary or mobile. The lift can
additionally be provided with accessories, or with accessories in-situ, to assist in achieving a safe and efficient
workstation
WP Work Positioner
3
When leaving the factory, EdmoLift WP work positioners comply with the requirements of Standard EN 1751-1, Safety
of Industrial Trucks, Part 1: Stacker Trucks and are CE marked in accordance with the Machinery Directive. WP work
positioners can also be supplied with accessories,to assist in achieving a safe and efficient workstation.
4 Note! EdmoLift products may be used in applications where they will not comply with the lift table
standard EN 1570 or the stacker truck standard EN 1757-Pt.1. There could also be situations where their use
means they do not meet other standards. In such cases, a risk assessment must be carried out, and a CE
Declaration of Conformity issued, in accordance with the Machinery Directive.
Copyright © EdmoLift AB 2004-2007
All rights reserved. No part of this publication may be reproduced, stored in a retrie-
14
val system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise without the permission of the publisher.
2006-05-15
EdmoLift AB
Jägaregatan 11
S-871 42 HÄRNÖSAND, SWEDEN
85921 GB
Tfn. +46 (0)611-83 780
Fax. +46 (0)611-51 15 80
info@edmolift.se