Preparation (continued)
5
Attach the camera mounting shoe.
Use camera mounting shoe B and
the screw plate.
Check the installing position of the
screw plate for your camcorder
against the table below.
1 Attach the screw plate to
2 Fasten the screw of the screw
3 Connect the A/V cable of the
Use camera mounting shoe B,
spacer C, and the screw plate.
1 Attach the spacer C to shoe B.
2 Attach the screw plate to
3 Fasten the screw of the screw
4 Connect the A/V cable of the
6
-GB
For DCR-TRV9E/TRV890E/TRV900E
DCR-
Camera mounting Shoe B
TRV9E
TRV890E
TRV900E
position 1 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
plate to the tripod screw hole of
the camcorder and tighten
firmly.
shoe to the camcorder's
AUDIO/VIDEO jack.
For DCR-TRV8E/TRV10E
position 3 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
plate to the tripod screw hole of
the camcorder and tighten
firmly.
shoe to the camcorder's
AUDIO/VIDEO jack.
1
2
2
1
Installation position
of the screw plate
on the camera
mounting shoe B
Camera
mounting
shoe B
Screw plate
Installation
position
of the screw plate
on the camera
3
mounting shoe B
Spacer C
Camera mounting
shoe B
Screw plate